- 相關推薦
Modeling and parameter identification of amplitude-and frequency-dependent rubber isolator
Abstract：A model to describe the hysteresis damping characteristic of rubber material was presented. It consists of a parallel spring and damper, whose coefficients change with the vibration amplitude and frequency. In order to acquire these relations, force decomposition was carried out according to some sine vibration measurement data of nonlinear forces changing with the deformation of the rubber material. The nonlinear force is decomposed into a spring force and a damper force, which are represented by the amplitude- and frequency-dependent spring and damper coefficients, respectively. Repeating this step for different measurements gives different coefficients corresponding to different amplitudes and frequencies. Then, the application of a parameter identification method provides the requested approximation functions over amplitude and frequency. Using those formulae, as an example, the dynamic characteristic of a hollow shaft system supported by rubber rings was analyzed and the acceleration response curve in the centroid position was calculated. Comparisons with the sine vibration experiments of the real system show a maximal inaccuracy of 8.5%. Application of this model and procedure can simplify the modeling and analysis of mechanical systems including rubber materials. 作者： Author： SUN De-wei[1] CHEN Zhi-gang[1] ZHANG Guang-yu[1] P.Eberhard[2] 作者單位： School of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,ChinaInstitute of Engineering and Computational Mechanics,University of Stuttgart,Stuttgart 70569,Germany 期 刊： 中南大學學報（英文版） EISCI Journal： JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY(ENGLISH EDITION) 年，卷(期)： 2011, 18(3) 分類號： U262.11 Keywords： rubber isolator modeling parameter identification hysteresis damping dynamic analysis 機標分類號： TM2 TP3 機標關鍵詞： identification of different dynamic characteristic application identification method spring mechanical systems centroid position measurement data response curve shaft system real system modeling relations In order changing analysis forces step 基金項目： The National Natural Science Foundation of China【Modeling and parameter identificatio】相關文章：
Study of (∧) decay parameter in J/ψ→∧(∧)decay04-29
MODELING EPHEMERAL GULLY EROSION FOR CONSERVATION PLANNING04-29
Centrifuge modeling of PGD response of buried pipe04-28
Analytical and Numerical Modeling for Flexible Pipes05-07
Application of homotopy parameter inversion method in Miyun Reservoir04-27
Progress in modeling of fluid flows in crystal growth processes04-26
Study on the AVO forward modeling of coal bearing strata04-28
Hydrologic modeling of the Heihe watershed by DLBRM in Northwest China04-29
Modeling Marine Stratocumulus with a Detailed Microphysical Scheme05-02